email  aerogen2007@hotmail.com

AFFORDABLE & ROBUST TURBINE AND BLADE DESIGNS

           UTILISE READILY AVAILABLE  PMA's       

1KW TO 2KW POTENTIAL. (DEPENDING ON PMG USED) 2YEAR WARRANTY ON ALL CHASSIS UNITS

Tough designed for 15-20 years.

My self furling (governing) tough steel chassis fitted with futurenergy bladeset  also see ebay member  windturbines2007

RIGID TAIL UPWIND POWERHOUSE AS SEEN ON E-BAY £120.00 2nd PAGE


    STEEL CHASSIS FOR 'WIND BLUE' TYPE PMA

ALSO HIGH TORQUE - HIGH RPM ALLOY BLADES, PERFORM MUCH BETTER THAN AIR X TYPE BLADES 3 BLADES ONLY EVER MADE 200W (TRUE TESTED OUTPUT OF AN AIR X).


            

HIGH REVING HIGH AREA ALLOY BLADES FOR HORNET EAGLE TYPE DELCO PMA,
HAND MADE BLADE ANGLES TO SUIT THESE PMA'S, TOUGH STEEL MOUNTING SPAR, PLEASE ENQUIRE FOR PRICE AND AVAILABILITY (THESE CAN BE MADE TO ORDER AS REQUIRED).

 

       LOW WIND HIGH RPM LOW PRICE BLADES.




Low wind alloy blades (here unpainted prototype) fitted on my delco 'wind blue type' pma chassis.

HIGH TORQUE, LOW WEIGHT TWISTED PROFILE BLADES


These really do work! accelerate rapidly and run smoothly making great power, made to order.

hand made, high area fast accelerating stiff blades, on a steel mounting, futurenergy 3 bladed type weigh 4kg (a quarter of standard plastic rotor) easy to balance, instructions included, one M10 bolt fixing!.

MY HAND MADE GLASS FIBRE HIGH AREA BLADES FOR THE F/ENERGY PMG, MOUNT WITH AN M10 BOLT, 1.4 METRE DIAMETER STEEL MOUNTING £96 POSTED IN U.K these have 7% higher area than the originals and comparable power outputs.

Developed from my own experimental designs, several recent video clips are on u tube link below (non furling model bottom two).   http://www.youtube.com/user/wind4watts  

                                                              

This robust hand made autofurling design (top photo black blades) is built to withstand the worst wind conditions, and are alot more substancial than most other types, they weigh 3.7 kg and produce great power from wind energy (higher to other more expensive turbines using same pmg), utilising easily sourced components. In very high winds or extreme gusts, the auto furling tail swings to the left gradually and proportionately turning the rotor to an angle to the wind direction, this keeps maximum outputs whilst protecting it from any potential damage, as gusts ease the rotor automatically resumes to the 'straight ahead' position.

This all steel guaranteed design coped easily with the fierce 70-88mph gusts we had begining of March, and similar gales and storms over the past year. These wind turbine units lowers the initial investment price a good deal and so reduces cost of home produced elecricity. These can produce up to 1.7kwatt with 48v volt pmg during windy periods, and good outputs even in moderate winds, see the output curves and prices of all 3 pmg's  at   http//:www.futurenergy.co.uk  (mine tend to be higher as they furl much later ) outputs are also affected by average windspeed/ wind energy available in your area, and the height the turbine is mounted at (the higher the better).

     

                            Main features of my chassis units are.

  1. Extreemly competetive price for a wind turbine unit, even after supplying your own pmg and blade set, the same (or lower) output turbines using the same pmg and blades elsewhere work out around £200-240 more, a Futurenergy type is rising to £830 soon.
  2. Tough compact weather resistant welded steel construction utilising steel tubing, that is built to last the course, 2 year warranty on the whole chassis, if it breaks I willl fix it!. 
  3. Utilises the powerful 7kg futurenergy  pmg 12-24 or 48 Volt rated, which are readily available mail order from  www.futurenergy.co.uk , included instructions and drawings mean very simple pmg mounting and wiring in 20-30 minutes using just 10+13mm spanners and pliers.
  4. Tried and tested reliable autofurling  tail unit, means no shutdowns are needed even in storms. Furls out in high winds 40mph only approx to gain max power.
  5. Built  units are available within a few  days, ( i have 2-3 units almost finished at any time) .
  6. Full e mail help/ support from myself if at all needed after delivery. Easy to understand with engineering type drawings &  instructions i will supply the unit with tail fitted ready for pmg fitment. 
  7. Can be posted almost anywhere, basic package is 1.1 metre long and just a 4.0  Kilo
  8. Optional furl 'lock out' included (easily reversible) up to 2kw  with 48v pmg in high winds

Total COSTS TO BUILD A NON FURL HIGH OUTPUT TURBINE 

Rotor cost                £170 delivered (better generation)

or you could use my GLASS FIBRE-3 OR ALLOY-2 BLADED .

pmg cost                   £168 delivered

Fixed tail Chassis      £132  delivered

TOTAL PRICE FOR RIGID TAIL  HIGH OUTPUT TURBINE £470-

FURLING MODEL £495

 E.C. Delivery Italia Deutshland France e.t.c. usually £26-29. 

  Costs less than some 500 watt units !.

               e mail  aerogen2007@hotmail.com

See my E Bay shop      http://stores.ebay.co.uk/WIND4WATTS